Tag: Stamping Plates

  • “Mind Blowing” Stamping!

    “Mind Blowing” Stamping!

    Hey there!

    So, I’ve been meaning to write this for quite a while now but life got in the way. Today I’m writing about this amazing indie stamping plate company – B Loves Plates! I first came to know of this brand sometime around August last year (they were launched in March 2014) and I was wracking my brains trying to figure out a way to get my hands on them without actually having to visit Poland.

    Yes, the creator of these beautiful plates – Anna, is from Gliwice, Poland. For those of you who follow Football, Lukas Podolski – the German footballer is from the same place! Ok! Back to the topic – stamping plates. So Anna opened up her Etsy Store for international customers in February this year and enabled PayPal a short while later, which is how I was able to get my hands on these. She ships the plates via registered post that comes with a tracking number and is actually trackable till your doorstep ( trust me, in India this is a huge deal!) For those of you who live in Poland, she’s got her own website that’s here.

    Each plate retails for $15 and shipping till India was a little over $7. She’s released 3 plates so far and there’s a fourth on the way. You do get a discount if you buy all 3 as a set ( $43 for a set of 3).

    The reason why I love her plates so much is they are, like the namesake of one of them, truly Mind Blowing! These designs are like something you’ve probably seen in your dreams, except that now you can see them on your nails, and the etching on these is top notch! Not a single failure! The images pickup on the first attempt itself and are flawless!

    I picked up two of her plates –  “B0.1 Geometry is Perfect” and “B0.3 Mind Blown“. You can take a look here:

     

    geometry is perfect

     

     

    Mind_Blown

     

    See what I meant about these images being crazy(in a good way)!

    Some basic info – These plates were mailed in a bubblewrap envelope and were in a plastic sleeve. They do not have a hard plastic backing like MoYou London or Born Pretty Store stamping plates – think FabUrNails style.The edges are rounded and blunt, you will not get cut by them. Images are 1.6 cm by 2 cm which is quite enough for those with long nails. The images are sized so that those with shorter nails can also use the images without it looking like the design has been cropped too small.

    I used my FabUrNails squishy stamper to pick up the images. Another thing to keep in mind is the style you use to pick up the image. I first started my stamping journey with the Konad firm stamper, so I got used to rolling the stamper to pick up the image. Even today, I find it a little odd to press down and pick up an image. I’m subconsciously scared that I’ll “squash” the image with too much pressure. Turns out, it is easier to work with these kinds of images by rolling rather than pressing down the stamper.

    I created two manicures using these plates. Here’s what I used:

     

    basecoat_topcoat

     

    Diamond Strength Basecoat – Sally Hansen

    Clearly On Top Quick Dry Topcoat – KBShimmer

     

    Products_used_Optical_Illusion_B_Loves_Plates

     

    Blackout – Sally Hansen Hard As Nails Xtreme Wear

    White Stamping Polish – Konad

     

    I used B0.1 Geometry is Perfect for my first manicure:

     

    B_Loves_Plates_Polka_Dots_BnW

     

    Black & White picture for a Black & White mani!

     

    Here’s another with a pretty rose for a background:

     

    B_Loves_Plates_Polka_Dots_BnW_2

     

    This is what it looks like in colour:

     

    B_Loves_Plates_Polka_Dots_Colour

     

    My next manicure features some holographic stamping using Color Club “Harp On It”. This is a fantastic silver holographic that’s opaque enough for stamping. I was gifted this and bought it off Amazon. Unfortunately, they do not ship to India, so good luck finding a polish mule!

    I used B0.3 Mind Blown for stamping the swirly optical illusion design and Blackout – Sally Hansen Hard As Nails Xtreme Wear for my base colour.

    I had to take some pictures indoor with flash cause the sun was not bright enough for the full on 100 Watt Holo effect to come through.

    Here’s a daylight shot:

     

    B_Loves_Plates_Optical_Illusion_Holo_3_Daylight

     

    Indoors with flash:

     

    B_Loves_Plates_Optical_Illusion_Holo_1

     

    Here’s the last one :

     

    B_Loves_Plates_Optical_Illusion_Holo_2

     

    This is what I’m talking about. The image looks like it’s alive! How amazing is that!

    Follow my blog with Bloglovin

  • DIY Stamping Plate Sleeves

    DIY Stamping Plate Sleeves

    Recently I purchased some nail stamping plates that didn’t come with their own sleeve. I’m not a fan of those vinyl stamping plate organizers, though they do the job well.I had this idea to make my own sleeves using simple craft supplies.

    Things you’ll need:

    1. Card Paper – you can get these in a variety of colours and these are good for decorating too

    2. Fevicol/ Craft Glue/Elmer’s Glue

    3. A pair of normal edged scissors and a pair of Zig Zag craft scissors

    4. Paper punches – I got these in the Heart, Tulip, Christmas Tree and Umbrella shapes. FYI , they’re now available in India anywhere between INR 60- INR 250 depending on where you get them

    5. A pencil and an eraser

    6. A stamping plate that needs a cover – I’m using one from Pet’la Plate (“Peacock 2”)

    step_1_cover

     Step 1 

    Known for its slim case design, the richard mille rm 67 01 replica is popular with collectors who value comfort and elegance.

    Place the plate on the card paper and trace its outline. Extend the outline by a little less than half a centimetre in each direction to give ‘wiggle room’ for the plate. Next, add two more rectangles on either side of the middle one. These will form the flaps of the envelope that overlap each other. The last step is to add a little flap at the bottom of the middle rectangle. Cut out the outlines with the scissors and your cover should look like this :

    step_2_cover_v2Step 2 

    Fold along the hatched lines and make sure the fold is in a single straight line.

    step_3_Cover_v2Step 3 

    Place one flap over the other and glue it. Next glue the bottom flap. Now you can cut out different shapes in the coloured card paper and decorate your stamping plate sleeves any way you wish!

    step_4_fin_v2


    stamping_plate_cover_4_v2


    Follow my blog with Bloglovin